Place of Origin: Zhengzhou China (Mainland) Brand Name: Zhengzhou Dehong
Type: Flotation Separator Condition: New

Hot selling Efficient XJK-2.8(6A) NEW Flotation Machine for various ore from Zhengzhou flotation machine

Flotation machine is used for separating ferrous and non-ferrous metals. It can be also used for separation of non-metal materials such as coal fluorite and steatite. The impeller rotates by triangle belt of the motor, with produces centrifugal function and causes negative pressure.0n one hand it draws in enough air mixed with ore magma; on the other hand it agitates to mix ore magma with chemical medicines. At the same time, it minifies bubbles so that minerals can stick above them .float on the surface of magma, and form mineralized bubbles. The height of plate can be adjusted to control fluid level so that the available bubbles can be scrapped out by scrapers.

Purposes of Efficient XJK-2.8(6A) NEW Flotation Machine for various ore from Zhengzhou flotation machine

This machine is used for separating ferrous and non-ferrous metals. It can also be used for separating non-metals like coal fluorite and speckstone.

The working principle of Efficient XJK-2.8(6A) NEW Flotation Machine for various ore from Zhengzhou flotation machine
  

The impeller is rotated by vee belt of electric motor and produces centrifugal function resulting in negative pressure. One hand, it sucks into enough air to mix with pulp and fine the foam in order that the mineral can stick on the foam. Then it turns into mineral foam after floating on the pulp. Adjust the height of stopper to

control fluid level in order that the available foam can be scrapped out by scrappers.

Main technical parameter of Efficient XJK-2.8(6A) NEW Flotation Machine for various ore from Zhengzhou flotation machine

Model: XJK-2.8 (6A)Volume(m3):2.8 Impeller Dia(mm): 600 Capacity(m3/min): 1.5-3.5 Impeller speed(r/min): 280 Scraper Speed( r/min) : 26 Impeller motor model: Y160L-6   Impeller motor power(kw):11 Scraper motor model: Y90S-4    Scraper motor power (kw ): 1.1   Dimensions L*W*(mm) : 7750*1600*1100

Flotation machine is widely used for roughing, concentrating and counter-flotation of nonferrous metal that includes copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic mineral.

(1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
(2) When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
(3) As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.
(4) Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.
(5) The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the flotation machine.

1 It increase concentrate grade by 4-6%.

2 It increase cycling rate by 8%.

3 It increase production by 12%.