Introduction of Flotation Machine

The flotation machine is applicable for the separation of non-ferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts., which can bring the centrifugal effect to form nagative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixs it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful forth can be scaped form the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized forth to the launder. The impellers and stators should be kept at a distance and should be changes when worn. The bearing in the pump should be maintained every three months.
                                                                          

Purposes of Model XJK-0.23(2A) ISO9001 Certificated for gold+copper+Zinc+Chromium+Manganese recovery plant FLOTATION MACHINE

This machine is used for separating ferrous and non-ferrous metals. It can also be used for separating non-metals like coal fluorite and speckstone.

The working principle of Model XJK-0.23(2A) ISO9001 Certificated for gold+copper+Zinc+Chromium+Manganese recovery plant FLOTATION MACHINE

The impeller is rotated by vee belt of electric motor and produces centrifugal function resulting in negative pressure. One hand, it sucks into enough air to mix with pulp and fine the foam in order that the mineral can stick on the foam. Then it turns into mineral foam after floating on the pulp. Adjust the height of stopper to
control fluid level in order that the available foam can be scrapped out by scrappers.

Characteristics of Model XJK-0.23(2A) ISO9001 Certificated for gold+copper+Zinc+Chromium+Manganese recovery plant FLOTATION MACHINE

1 The impeller consistes of closed double section cones, which can produce strong down-circulation
2 Big air inlet amount, low energh consumption
3 Each trough has the function of air suction, ore pulp suction and flotation, it can make a flotation circuit itself, with no anxiliary equipments. The horizontal configuration makes it easy to change process
4 Rational ore pulp circulation reduces coarse sand sefiment.
5 There are automatic and electric control devices of ore pulp level which makes easy adjustment.

The main technical parameter of Model XJK-0.23(2A) ISO9001 Certificated for gold+copper+Zinc+Chromium+Manganese recovery plant FLOTATION MACHINE

Model: XJK-0.23(2A)      Volume(m3):0.23       Impeller Dia(mm): 250        Capacity(m3/min): 0.12-0.28 Impeller speed(r/min): 500          Scraper Speed( r/min) : 17.5             Impeller motor model: Y90L-4
Impeller motor power(kw):1.5        Scraper motor model: Y80M1-4